Industry & Business

Four Exoskeletons Tested for Mining Work Show Task-Specific Benefits

A Virginia Tech laboratory study tested four passive back- and shoulder-support exoskeletons across simulated mining tasks, finding benefits that varied by device and movement.

Exoskeleton Index Editorial Published November 11, 2026 6 min read
RESEARCH Virginia Tech study published online 20 May 2026 in Applied Ergonomics
SETTING Two controlled laboratory experiments simulating manual mining tasks, not operating mines
PARTICIPANTS 18 participants in each experiment, with and without exoskeleton assistance
DEVICES HeroWear, Laevo Flex, Paexo Shoulder and Ekso EVO; all passive back- or arm-support systems
EVIDENCE STATUS Measured muscle unloading and user perceptions; no mine-site deployment or long-term injury outcomes

Mining work is not just another lifting task

Installing wire mesh overhead, suspending cables, drilling and lifting core boxes can demand very different movements within the same shift. A worker may bend forward, reach above shoulder height, turn in a confined space and carry equipment from one position to another. Exoskeletons designed to support the back or arms may help with some parts of that work while creating different demands elsewhere.

A research team at Virginia Tech examined that problem through two laboratory studies using four passive exoskeleton systems. The paper by Feyisayo Akinwande, Sunwook Kim and Maury A. Nussbaum appears in the November 2026 issue of Applied Ergonomics, although it was first published online on 20 May. The findings are relevant to mine operators and other industrial buyers, but they are not evidence from an active mining deployment.

How the study was conducted

One experiment examined two back-support systems: HeroWear and Laevo Flex. A separate experiment tested two shoulder-support systems: Ekso EVO and Paexo Shoulder. Each involved 18 participants and included an unassisted comparison condition. Researchers measured muscle activity and collected participants’ perceptions of exertion and discomfort during simulated tasks.

4 Passive exoskeleton systems tested
2 Separate laboratory experiments
18 Participants in each experiment

The back-support experiment simulated cable installation, lifting core sample boxes and overhead wire-mesh installation. The arm-support experiment included those activities plus overhead drilling. The published abstract reports muscle-activity changes and subjective responses, not productivity or injury rates in operating mines.

Where assistance made a measurable difference

The two back-support exoskeletons reduced peak trunk-extensor muscle activity by approximately 15–30% during core-box lifting and 9–21% during overhead installation tasks. These ranges cover the studied systems and conditions; they should not be interpreted as a fixed benefit for an individual worker.

The shoulder-support findings were more task-specific. Paexo Shoulder was associated with approximately 23% lower total shoulder-muscle activity during cable hanging, 22% during core-box lifting and 24% during wire-mesh installation. Ekso EVO showed a statistically significant reduction of about 17% during wire-mesh installation, but not the same pattern across every reported task.

The four systems, compared

The table links to Exoskeleton Index records where the exact product profile is available. The study’s HeroWear device is not identified as the current Apex 2 in the public abstract, and an exact Paexo Shoulder profile has not been independently verified in the EI directory. Those links are therefore labeled appropriately.

System in study Assistance Main reported finding Important context
HeroWear Manufacturer profile Passive back support Lower peak trunk-extensor activity in selected lifting and installation tasks. The paper does not identify the version as the current Apex 2.
Laevo Flex Product profile Passive back support Lower peak trunk-extensor activity in selected tasks. Some participants reported increased discomfort at the waist or hips.
Paexo Shoulder Browse shoulder systems Passive shoulder support Approximately 22–24% lower total shoulder-muscle activity across three named tasks. Linked to a relevant directory category, not an exact Paexo Shoulder profile.
Ekso EVO Product profile Passive shoulder support Approximately 17% lower total shoulder-muscle activity during wire-mesh installation. Significant reductions were not reported consistently across the other tested tasks.

On smaller screens, scroll the comparison table horizontally to see all four columns. Product links lead to EI profiles where verified; assistance links open the relevant directory view.

Lower muscle activity did not mean identical user experience

Both back-support systems reduced some measures of physical demand, but their perceived effects differed. Participants using HeroWear reported less upper-back exertion, while Laevo Flex was associated with increased waist or hip discomfort in some conditions. That difference matters when devices must be worn through varied tasks instead of a short, isolated movement.

The two shoulder-support systems generally reduced perceived exertion across several body regions with limited discomfort. Overall, the results suggest potentially useful assistance, but not that one product is best for all mining tasks or workers.

What the study does not establish

The experiments did not take place underground or on a working mine site. They cannot establish effects on long shifts, heat, dust, restricted clearance, interaction with personal protective equipment, uneven terrain or emergency procedures. A reduction in recorded muscle activity also does not demonstrate fewer musculoskeletal injuries, greater productivity or sustained worker acceptance.

Exoskeleton Index analysis

The clearest lesson is that support must be evaluated against the specific work. Back-support and shoulder-support systems should not be pooled into one performance ranking, and a result from wire-mesh installation should not be treated as a result for drilling, lifting or an entire shift.

The findings also reveal why selection needs more than an electromyography percentage. A device can unload a targeted muscle group while introducing pressure, restricted movement or extra time to put it on. The practical question is whether the full work process improves with the device, including tasks for which it provides no assistance.

What a mine-site trial should measure next

The authors recommend field evaluation. For mine operators, a useful trial would compare assisted and unassisted work across a representative shift, recording both biomechanical outcomes and the demands introduced by wearing the system.

TASK FIT Test the entire sequence

Include lifting, overhead installation, drilling, walking, transitions and movements where the exoskeleton might interfere.

WORKER EXPERIENCE Measure comfort and usability

Record fit, pressure, heat, freedom of movement, donning time and compatibility with protective equipment.

FIELD EVIDENCE Follow real shifts

Track repeat use, worker choice, task performance, fatigue, unexpected hazards and safe removal procedures.

What this means for industrial exoskeleton buyers

The study supports a task-led approach rather than a general claim that passive exoskeletons are effective or ineffective in mining. For example, someone evaluating overhead mesh installation should look at shoulder support and work-posture constraints; someone evaluating repetitive lifting needs a different evidence set. Both groups still need to assess comfort, fitting restrictions and interaction with site safety procedures.

Our Industrial Exoskeletons 2026 Insight explains the wider product landscape, while our review of 106 industrial exoskeleton studies examines what the broader evidence can and cannot demonstrate. Readers can also explore the passive back-support and passive shoulder-support categories in the EI directory.

What to watch next

Field studies would help determine how much of the measured laboratory benefit carries into long, varied workdays, and whether any reduction in physical demand comes with acceptable comfort and operational overhead. Longer observation is also needed before claims about injury prevention or adoption become defensible.

For now, the value of this study is its specificity. It shows where different support systems reduced muscle activity during mining-related tasks, and where those gains were accompanied by different user perceptions. That is a stronger starting point for real-world trials than a single headline percentage.

INDUSTRIAL EXOSKELETONS & SUPPLIER RESEARCH

Evaluating exoskeletons for demanding work?

Exoskeleton Index helps industrial teams identify relevant systems and compare intended use, available evidence, fit requirements and supplier availability.

Explore relevant products and suppliers Independent market information. A product listing does not establish workplace suitability.

Sources and reporting notes

Primary research. Akinwande F, Kim S, Nussbaum MA. “Passive back- and arm-support exoskeletons have effects on physical demands and user perceptions in simulated manual mining tasks that are generally beneficial but are both device- and task-specific.” Applied Ergonomics. 2026;137:104819. First published online 20 May 2026. DOI: 10.1016/j.apergo.2026.104819.

Independent indexed abstract. PubMed record PMID 42160797. Numerical outcomes and device names in this report follow the indexed abstract.

Reporting context. This article distinguishes the two laboratory studies from real mining deployment, notes the absence of injury outcomes and does not assume that current commercial product revisions are identical to the tested systems.